How to Hang Your Framed Art
Our frames come with two brackets to ensure the most sturdy hold. Unlike hanging framed pieces with wire backings, these brackets prevent the frame from
shifting and hanging askew once they are secured to the wall. Unless requested, our frames do not come with any screws or other materials needed to hang the framed art.
Click here to read more about our framed art.
What's in the Box?
All framed art pieces are shipped
in a flat box. The framed piece and two brackets are shipped with the frame. One bracket will be attached to the frame using three
screws and an additional bracket will be attached lower on the frame using tape. The additional bracket that is taped to the frame
is what you will screw into the wall. For larger framed art, two brackets will be attached to the back of your piece and two to hang
your framed art will be taped to the back.
Needed to Hang Framed Art
1. wall space
2. framed art
3. three screws
4. screw driver
5. level
6. stud finder (optional)
Step One - Find a spot
Find a spot in the room to hang
the art. You want to choose an area on the wall where the piece will fit. If the piece is too big for the area in which it is
placed, it will overpower the room. If the framed art is too small for the space, it will go unnoticed.
You can use a stud finder to find
a spot in the wall that will better support the framed piece. Stud finders are used to find the studs inside of the walls and add
more support for the screw and frame when you drill into the wall.
Step Two - Remove the extra bracket
Carefully take off the extra bracket
that is taped on the back of the frame. This is the bracket that will need to be screwed to the wall.
Step Three - Put the bracket against the wall
Hold it up against the wall in the
desired spot. Make sure that the elevated part is facing up and away from the wall. The three holes should be down and flush against
the wall.
Step Four - Make it even
Hold up the level on top of the
bracket, make sure it is flat against the bracket for the best results. The level should also be flush against the wall. Move the
bracket against the wall until the level shows that the bracket is even.
Step Five - Mark in the holes
Mark inside of the first hole
of the bracket. You can use a pencil, pen or any other writing utensil (once the screws are in, you will no longer be able to
see the marks). Do the same for the second and third holes on the bracket.
Step Six - Line the first hole up
Line the first screw up with
the first hole. Once you have the screw in place in the hole of the bracket, you can let go of the bracket and let it hang.
Step Seven - Fasten the screw
Using the screw driver, fasten
the first screw into the wall. For best results, do not fasten the screws all the way in until they are all in place.
Step Eight - Fasten the second and third screws
Following steps six and seven, secure screws in the second and third hole.
Step Nine - Hang the framed art
The bracket that is attached to the
frame should now fit on top of the bracket that is screwed into the wall. Once the bracket is completely secured to the wall, take the
frame and hold it so the back is facing the wall. Move the frame towards the wall and place the bracket on the back of the frame frame onto
the bracket you secured on the wall.
Step Ten - Show it off
Now your frame is hung and ready to be shown off!
All of our framed pieces come with 100%
satisfaction guarantee! If you do not like the way your framed artwork looks or it arrives damaged, contact one of our cordial customer service
representatives at
800-418-2166
or support@framedart.com.
For more contact information, visit our contact us page.
Click here for a step by step tutorial on how to hang your canvas!